Strike Eagle 1-6x24 Second Focal Plane Riflescope - BDC3 (MOA) Reticle (SE-1624-2)

Speed and versatility—that’s what 1x variable optics offer shooters who need to engage targets from point-blank out to 600 yards, and that’s exactly what you get with the redesigned Strike Eagle. With the BDC3 reticle and a thread-in throw lever, you’ll be on target even faster.

BDC-3 (MOA) Reticle

• Improved for ranging distances and holdovers and illuminated for clarity in low light.
• Use the ranging feature at the top of the reticle to range a silhouette target up to 600 yd.
• BDC subtensions accurately shoot targets from 20-650 yards.
• 5 MPH wind increments
• 

• Throw Lever Installation

  Thread in the included throw lever as shown until the throw lever is secured. Do not over torque the throw lever

• 

• Magnification

  The magnification adjustment is used to change the riflescope’s magnification level, or "power,” adjusting from low to high magnification depending on the shooter’s preference.

• 

  Side Illumination Control

  To activate/adjust the illumination, rotate the adjustment dial in either direction. The illumination dial allows for 11 levels of illumination intensity.

• Reticle Focus Adjustment

  Your riflescope uses a fast focus eyepiece designed to quickly and easily adjust the focus on the riflescope’s reticle.

  1. Look through the riflescope at a blank white wall or at the sky.

  2. Turn focus knob fully outward (counterclockwise).

  3. Slowly turn the eyepiece focus knob inward until the reticle image is as crisp as possible.

• 

• Turret Adjustments

  Your riflescope features adjustable elevation and windage turret dials with audible and tactile clicks. Each click moves the point of impact 1/2 MOA.

  1. Remove the turret caps.

  2. Following the directional arrows, turn the dials in the direction you wish the bullet’s point of impact to go.

  3. When finished adjusting, replace the turret caps.

• 

• Indexing the Turrets

  Strike Eagles feature Elevation and Windage Turrets that allow you to re-index the zero indicator after sight-in without disturbing your zero setting.

  1. After completing the final sight-in, remove the turret cap(s).

  2. Without rotating the turret, twist the turret dial to reposition it with the “0” mark aligned with “Up” on the scope housing.

  3. Replace the turret cap(s).

• 

• Product Description

  Speed and versatility—that’s what 1x variable optics offer shooters who need to engage targets from point-blank out to 600 yards, and that’s exactly what you get with the redesigned Strike Eagle. With the BDC3 reticle and a thread-in throw lever, you’ll be on target even faster

  Our Factory

  

  

  Highly Praise

  

  FAQ

  Q:Are you the manufacturer or trading company?
  A:We are both the both,we have our own factory and office.
  
  Q: Can you provide OEM or ODM ?
  A: Yes, we offer custommade service to our clients.
  You need to provide us some technical data such as dimension and mark
  
  Q: Can item be printed our own logo?
  A:Yes, You just need to send us your the source file of logo.
  
  Q:Do you provide samples ? is it free or extra ?
  A:We will charge you on the sample fee as less as we can, even sometimes a free sample is possible. However, you have to pay us the cost of courier by express like: DHL, TNT, UPS and FEDEX.
  
  Q:How should I do, if items are broken?
  A:Except man-made mistakes, we will exchange the defective with a brand new one
  within 7 days after you get our products
  
  Q:Which Shipment way is available?
  A:By sea to your nearest port,by air to your nearest airport,by international express (DHL,UPS,FEDEX,TNT,EMS,etc)to your door.

  Contact us for more information: optics@sabpack.com